Patrocinado por PHPDocX

Síguenos en Twitter

Buscar en WikilleratO
   

Assessing The Safety Of Magnetic Workholding

De Wikillerato

(Diferencias entre revisiones)

Laquanda93 (Discutir | contribuciones)
(Página nueva: Resistance to the implementation of magnetic function holding commonly begins using a concern for security. These concerns is usually allayed by assessing the technologies, holding en...)
Ir a las siguientes diferencias →

Revisión de 01:54 10 mar 2014

Resistance to the implementation of magnetic function holding commonly begins using a concern for security. These concerns is usually allayed by assessing the technologies, holding energy and optimal operating situations of magnetic perform holding in terms of operational security.

Despite the competitive link added benefits of magnetic workholding in lowering expenses and enhancing productivity, there still exists a resistance to the implementation of magnetic technology as the key perform holder in machining operations. This resistance usually starts with a concern for safety. By assessing the technologies, holding energy and optimal operating situations of magnetic perform holding relative to operational safety, these concerns can be allayed.

Magnetic Operate Holding as a Protected Technologies

If a machine operator has held workpieces with mechanical clamps for decades, the idea of relying on magnetism to hold workpieces, specially in heavy milling operations, boils down to an issue of trust: Is this actually secure? Even though understandable this opinion is rooted in subjectivity not objective reality. More than most likely, those who hold this point of view might not fully fully grasp the information of how safe magnetic work holding is.

So, how can magnetic work holding be thought of as a secure technologies? By definition, it produces a uniform, consistent, and infinite holding energy that does not loosen up, give, or decrease till an operator de-energizes it.

Normally, magnetic operate holders are constructed with an array of person magnets embedded into a magnetic chuck or plate. Every single magnet has a north and south pole across which flows magnetic energy referred to as flux. When a workpiece is placed across the poles of these magnets, flux flows into it. When placed in this flux field, a magnetic field of opposite polarity is induced in to the workpiece thereby producing a magnetic attraction amongst the chuck plus the workpiece. This attraction will stay consistent, uniform, infinite, and reputable so long as the magnetic field is energized. This reliability makes magnetic workholding a actually safe technology.

Magnetic Work Holding as a Safe Holding Force

Holding power or strength is an additional issue regarded when forming an opinion about the security of magnetic workholding. If an operator does not understand how robust magnetic workholding is, he may perhaps mistakenly believe magnetic technologies is not powerful adequate to perform the job safely. This opinion is usually allayed by two facts:

(1) magnetic workholding can possess a clamping power up to 1000 daN and

(two) depending upon the application, an instantaneous clamping force of 12 tons per square foot is often generated by magnetic workholders. This level of holding force is greater than comparable to mechanical clamps with a single additional advantage: magnetic holding force is uniform, continuous and infinite until the operator de-energizes it.

Optimal Operating Situations

To implement magnetic perform holding solutions may possibly need some instruction to understand the technology's optimal operating situations. As an example, magnetic function holding is greatest made use of with smooth-surfaced workpieces in lieu of rough ones simply because the smoothness decreases the air gap between the workpiece plus the magnet; small air gaps increase magnetic attraction and also the holding bond. Some materials are much better conductors of magnetism than other individuals. For instance, annealed components are ideal even though hardened materials do not absorb flux as simply and will retain some magnetism. This situation can be corrected inside seconds with demagnetization. Finally, the path with the holding force is however a different adjustment an operator might have to create to safely implement magnetic function holding. All magnets have 100 percent clamping force straight away from the face of the magnet, but only about 20 % clamping force against side forces. So, the geometry of a cut has to be thought of inside the machining method to reap the advantages of this type of workholding.

   
 
ASIGNATURAS
MatemáticasFísicaQuímicaBiologíaDibujoHistoriaLengua y LiteraturaHistoria del ArteFilosofía
Creative Commons License
Los contenidos de Wikillerato están disponibles bajo una licencia de Creative Commons.
Pueden utilizarse y redistribuirse libremente siempre que se reconozca su procedencia.